The Cap-M-Quik Capsule Fillers are simple devices that allow you to fill empty "0" and "00" capsules. This is a simple capsule holder that allows you to fill up to 50 empty gelatin capsules at one time (Image). This may be considered a must for bitter-tasting supplements such as Tribulus Terrestris and Prohormones. The Cap-M-Quik Tamper allows you to pack more material into capsules (Image).

CAPSULE FILLER DIRECTIONS:

1. ASSEMBLE
Before starting, place capsule Base on large, clean paper. Place Spacers on end posts facing center. Set Holder on four corner posts resting on Spacers above Base. Note: Spacer is the same for "0" and "00" fillers. Be sure these spacers are installed properly for the size capsule being filled.

2. LOAD
Manually separate capsules placing longer half in holes. (Top of capsules should be below surface of Holder).

3. FILL
Pour powdered material or vitamins onto Holder spreading substance evenly with card, filling all capsules. Remove excess substance carefully by scraping from Holder onto paper.

4. CAP
Turn Spacers that keep Holder elevated 90 degrees (¼ turn). Holder will fall down against Base exposing upper half of capsules. Manually replace caps and remove filled capsules.

CAPSULE TAMPER

1. Fill capsules in Cap-M-Quik FILLER.
2. Press TAMPER down and remove.
3. Refill capsules again and repeat.